Water Source Heat Pump
Heats water up to 150° F (66° C)
Use as preheater for higher temperature systems
COP up to 5.0 generating significant savings
Heating capacity from 25,000 BTU to 250,000 BTU
Cooling capacity from 20,000 BTU to 220,000 BTU
Recovery rates from 55 to 550 gallons per hour
Absorbs heat from water sources including process and ground water.
Uses environmentally friendly R134a refrigerant
Double wall condenser for potable water heating
BACnet compatible logic controller optional
Our C-Series is a high-efficiency water-to-water heat pump water heater that can be tailored to your needs in several ways. These units range in capacity from 25,000 BTU to 250,000 BTU, generating from 50 to 500 gallons of hot water per hour.
While these units are heating water up to 150°F, they are also providing cool water on the source side that can be used for chiller water for air conditioning systems or process water for equipment.
|Model||Source Water Flow||Heated Water Flow||Heating Btu/hr*||Heating COP||Cooling Btu/hr*||Cooling COP||Combined COP||Dimensions LxWxH|
* Water heated from 70°F to 130°F with 75°F entering source waterIn view of ongoing product improvements, design and specification are subject to change without notice. Nyle Systems can accept no responsibility for possible errors in catalogs, brochures or any other printed material.
|Double Wall Brazed Plate||Single Wall Brazed Plate||Digital Temp Controls||208-230/1/60 or 208-230/3/60|
|Double Wall Brazed Plate||Double Wall Brazed Plate||Programable Logic Controller||440-480/3/60 or 400/3/50|
* All Power Options not available on all units, additional power options available