Air Source Heat Pump
Heats water up to 150°F (66°C)
Use as preheater for higher temperature systems
Coefficient of performance (COP) up to 5.0
Heating capacity from 25,000 BTU to 250,000 BTU
Cooling capacity from 20,000 BTU to 220,000 BTU
Recovery rates from 55 to 550 gallons per hour
Removes unwanted heat & humidity from air
Uses environmentally friendly R134a refrigerant
Double wall condenser for potable water heating
BACnet compatible logic controller optional
Our C-Series is a high-efficiency air-to-water heat pump water heater that can be tailored to your needs in several ways. These units range in capacity from 25,000 BTU to 250,000 BTU, generating 50 to 550 gallons of hot water per hour.
In addition to heating water for potable or process water purposes, the Geyser C-Series provides cool air that can be used to offset air conditioning costs. This cooler / dehumidified air can be recirculated back into the immediate area, eliminating waste heat or directed to a desired location, via ductwork, by selecting the centrifugal blower option.
|Model||Water Flow Rate||Heating Btu/hr*||Heating COP||Cooling Btu/hr*||Cooling COP||Combined COP||Dimensions LxWxH|
* Water heated from 70°F to 130°F with 75°F, 60% RH entering airIn view of ongoing product improvements, design and specification are subject to change without notice. Nyle Systems can accept no responsibility for possible errors in catalogs, brochures or any other printed material.
|CONDENSER||EVAPORATOR||DEFROST CYCLE||FAN TYPE||CONTROLS||POWER REQUIREMENTS|
|Double Wall Brazed Plate||Standard Air Coil||Non-Reversing||Axial Fan||Digital Temp. Controls||208-230/1/60 or 208-230/3/60|
|Double Wall Brazed Plate||Coated Air Coil||Reversing||Centrifugal Blower||Programable Logic Controls||440-480/3/60 or 400/3/50|